
Launchpad Options
Find the creation settings for your launchpad and open detailed guides when needed.
This page covers only launchpads with settings beyond the launch currency. These settings appear below Launchpad, before Configure Token. Fields vary with the selected launchpad and quote.
For all supported launchpads and their currencies, see Blockchain & Launchpads.
Pump.fun: rewards and launch options
Send creator fees to: Deployer / Holders / Distribution
otcdesks : Uses all creator fees to reward holders in a selected asset.
Ansem : Receives creator fees; the airdrop buy purchases your token for $ANSEM holders.
UsePaid : Assigns the entire creator-fee stream to UsePaid, which pays 80% of it in dollars to an X account. This choice is permanent once the coin launches.
zaio.fun : Lists the coin on zaio.fun. Its
Pump.fun creator fees are split 50/50 between your dev wallet and zaio, permanently once the coin launches. Claim your half from the launch page.
A zaio.fun launch is quoted in SOL and cannot use Mayhem Mode, Off-Chain Create, holder rewards, a custom creator fee, Ansem, otcdesks or UsePaid. The option appears only while zaio.fun is available.
Quote : The collapsed picker also accepts a custom quote.
Additional options
Mayhem Mode: Runs
Pump.fun’s AI trading bot for the first 24 hours.
Off-Chain Create: Uses a separate random public key as the on-chain creator. Your dev wallet still signs and pays.
Bags: fee sharing
Enable Share Fees, then add each recipient’s username or address and their percentage.
Anoncoin: API key
Enter the required
Anoncoin API key.
Printr: curve, supply and developer fees
Send fees to: Staking Pool / Creator / Buyback & Burn
Max supply: 100 million / 1 billion / 10 billion tokens.
Dev fees: 0.01–1.5% before migration / 0.01–1.4% after.
Meteora DBC: configuration key
Enter the required DBC Config public key.
Raydium LaunchLab: platform config and raise
Platform config: enter the address of the LaunchLab platform the pool opens under. Its fees, quotes and raise apply to your launch.
Need a platform config? Create one with Raydium’s platform config guide. Proxima does not offer a way to create one.
Raise: the amount the curve raises before it migrates, within the platform’s minimum and maximum. Leave it empty to use the platform default; if the platform fixes the raise, Proxima shows that amount instead.
Stoxes: curve and fee distribution
On Solana
Graduation Market Cap: $25,000 / $35,000 / $40,000. The opening market cap is fixed at $4,000.
Trading Fee: 1% / 2% / 3%.
Fee Distribution: choose Creator income, Revenue split, Holder dividends, Supply burn, Stoxes booster, Dip reserve, Buyer rewards, Liquidity rewards, Stoxes draw or Floor reserve.
Revenue split accepts up to five wallets. Holder dividends adds the payout asset and a 10–100% holder share. Stoxes draw requires the 3% trading fee.
On BNB Smart Chain
Stoxes Kind: No tax or Taxed. Supply is 1 billion tokens, 80% sold on the curve, with a 1% curve fee on every trade.
No tax: send 0% to 50% of the pool fee to the Creator or to Buyback & burn. The token graduates to a PancakeSwap V3 pool (1% fee).
Taxed: set a buy and a sell tax, up to 10% each in steps of 0.5%, split between the vault, the creator, a burn and liquidity (total 100%). The token graduates to a PancakeSwap V2 pair.
Vault: None, Floor reserve, Stocks, Buyback & burn, BNB burn, Split or Gift. Any vault needs a share above 0%.
Flywheel: rewards and supply
Creator Rewards: send rewards to the Creator or Holders.
Supply: set the whole-token supply. The default is 100 billion tokens.
CoinBarrel: creator fees
Use the same creator fee for buys and sells, or set each side separately from 0.5% to 10%.
Optionally split each fee between Revenue, Reinvestment, Rewards and Burn. The buckets must add up to that side’s creator fee.
Custom revenue recipients must total 100%. You can also exclude the creator from rewards.
StonkFun: fees and rewards
Standard : 1% / 2% pool fee.
Rewards : 1% / 3% Token-2022 transfer fee, plus a fixed 1% pool fee.
Pons: version, fees and buybacks
Send creator fees to: Deployer / Wallet / Holders
Creator Tax : 0–10%.
Buyback Enabled : use creator tax for automated buybacks.
Hood.fun: supply and fee distribution
Total Supply : total number of tokens. Default: 1 billion.
Community Coin : choose who receives trading fees: Holder / Creator
Realm: LP fee, launch tax and ownership
LP Fee: 1% / 0.5%, charged by the pool on every trade. Realm keeps 30% of it.
Launch buy tax and Launch sell tax: start at the rate you set and fall linearly to the static tax over the number of minutes set in Decays over, 20 at most. This tax targets snipers and goes to the developer wallet.
Static buy tax and Static sell tax: held for the number of hours set in For. LP fee plus static tax stays at or under 5% per side.
Renounce ownership: deploys the token with no owner.
ignix.bot: tax and holder rewards
Buy tax / Sell tax: 0–10% per side, on top of the curve’s 1% fee.
Tax to holders rewards: appears once a tax is set. Choose the share of the tax paid to holders in the quote, from 0% to 100% (100% by default). The creator keeps the rest.
Pangea: chains, fee and tokenomics
Pangea Chains: launch one coin on two to five chains among Ethereum, Base, BSC, Robinhood and Solana, including at least one EVM chain. The chain you launch from is always included; Pangea sends the others at the same dollar price, kept in line by arbitrage over LayerZero.
Trading fee: 0.3–5%, 1% by default, set once for good. Pangea keeps a fifth of it, never less than 0.2% of volume; you keep the rest. Turn on A different fee on each chain to set one per chain.
Opening market cap, each chain: $3,000–$500,000, in whole dollars. The whole launch opens at that amount multiplied by the number of chains.
Degen mode, on by default: 1 billion tokens in all, with an equal share paired on each chain. Turned off: 1 billion tokens on each chain.
Same contract address on all EVM chains: deploys the token at one address on every EVM chain you pick.
Burn my creator fees: makes the burn address the fee receiver on every chain, for good. Otherwise, set an optional EVM fee receiver (the dev wallet by default) and, with Solana included, a Solana fee receiver.
Spend my fee share automatically: sends the creator’s share to the coin’s vault, split between Burn, Buy and hold, Add to liquidity, Creator and Community (total 100%). Presets: Balanced, Burn, Liquidity and Community. Buy and hold needs a treasury wallet and Community a community wallet, plus Solana wallets when Solana is included.
Stonks Exchange: fee tier and fee owner
Fee tier: the pool fee charged on every trade. With the current tiers, Stonks Exchange keeps 30% of a 1% fee, or 25% of a 2% or 3% fee; the rest goes to the fee owner.
Fee owner: optional 0x address that receives the rest of the pool fee. The dev wallet by default.
Banner url: optional https link to the token’s banner.
With a quote other than ETH, Proxima can offer Pay dev buy in quote, where the dev wallet holds the quote token, or Pay dev buy in ETH (zapped), where the launcher swaps the dev’s ETH into the quote.
genius.fun: fee share and snipe tax
Send fee share to the foundation: off by default. The 1% destination share of the 2% trading fee goes to the genius foundation vault instead of you, so you keep 0.25% instead of 1.25%.
Exempt holders from the snipe tax: on by default. Your holder wallets buy untaxed right after the create, outside the 99% tax that decays over 15 seconds. The list is public on chain and links those wallets to you; 31 holders at most.
Uniswap V2: liquidity, fees and limits
Set the initial liquidity in ETH.
Trading Fees (optional): Constant / Dynamic buy and sell fees, with a Treasury recipient.
Anti-Whale Limits (optional): cap the amount per wallet and transaction.
Uniswap V3: liquidity and pool fee
Set the initial liquidity in ETH.
Pool fee: 0.01% / 0.05% / 0.3% / 1%.
Flap: quote, taxes and vaults
Optional vault: Stocks / Buyback / Custom
Buy / sell tax: 0–10% each. Allocate 100% of the tax.
Flap Taxes & Vaults
Flap taxes and vaultsChoose a vault
Vault : Stocks, Buyback or Custom. Click the active card again for no vault; expand an option below for settings.
Without a vaultA standard tax token, with optional holder dividends.
Set tax, allocation and any available recipient. An empty recipient defaults to the developer wallet.
With Dividend above zero, choose a compatible Dividend Token . Recheck it after changing Launch Currency.
Minimum share balance sets the dividend eligibility threshold: 10,000 tokens by default and minimum, including without a Stocks Vault.
On Robinhood, Block-0 has no recipient or dividend controls.
StocksBasket dividends from 1 to 8 supported assets.
Select 1 to 8 assets from the active chain’s catalog.
Minimum share balance : at least 10,000 tokens to receive basket dividends.
On BNB Smart Chain, Instant dividend can be enabled or disabled. Robinhood Stocks Vaults always use instant dividends.
All tax funds basket dividends. The factory requires 100% Marketing as its technical allocation.
BuybackBuy back and burn tokens or LP tokens.
The vault uses accumulated native assets. Choose a buyback method:
- Token Buyback & Burn buys the launched token and burns it.
- LP Buyback & Burn buys the token, pairs it with the native asset, and burns the resulting LP tokens.
Choose the execution condition: Time , Vault Balance , or Time + Vault Balance .
- Start delay and minimum interval: 1 to 525,600 minutes.
- Native amount per execution: greater than zero.
CustomAn EVM factory with its own fields and policies.
Custom Vaults use
Flap’s vault system, not a Proxima product. For factory setup and vault configuration, see the
Flap documentation.Enter the EVM factory address. Its published schema and policies determine the fields.
Disabled factories cannot be used. Unverified factories show a risk warning.
If no schema is published, the form falls back to advanced ABI-encoded
vaultDatabeginning with0x.Choose a Launch Currency accepted by this vault.
Set the tax and allocation
- Buy Tax
- 0–10%
- Sell Tax
- 0–10%
- Tax allocation
- 100%
Buy Tax and Sell Tax each accept 0% to 10%. They cannot both be 0%.
Tax allocation must total exactly 100% across Marketing, Deflation, Dividend, and Liquidity.
Recheck the launch mode
On Robinhood, a custom quote or custom tax replaces Block-0 with Quick . Organic and Manual remain available.
What counts as custom tax?
An allocation other than 100% Marketing, or an explicit Marketing recipient address.
Changing only the Buy Tax or Sell Tax rate does not trigger this restriction.
Four.meme: engine, tax and royalty
Classic: optional tax split between Burn , Dividends , Liquidity and Recipient .
Open Four: split the Royalty buy fee between Founder , Holders , Burn and Liquidity .